Initial commit of files

2021-01-22 10:11:21 -05:00
parent d46bf141a3
commit a9cbd4dac0
418 changed files with 548003 additions and 0 deletions
--- a/SoftwareDefined/HackRF/hackrf-2015.07.2/firmware/common/rom_iap.h
+++ b/SoftwareDefined/HackRF/hackrf-2015.07.2/firmware/common/rom_iap.h
@ -0,0 +1,121 @@
+/*
+ * Copyright 2013 Benjamin Vernoux <titanmkd@gmail.com>
+ *
+ * This file is part of HackRF.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __ROM_IAP__
+#define __ROM_IAP__
+
+#include <stdint.h>
+
+typedef enum 
+{
+	/* TODO define other commands */
+
+	IAP_CMD_INIT_IAP = 49,
+	/* Command Init IAP
+	Input Command code: 49 (decimal)
+	Return Code CMD_SUCCESS
+	Result None
+	Description Initializes and prepares the flash for erase and write operations.
+	Stack usage 88 B */
+
+	IAP_CMD_READ_PART_ID_NO	= 54,
+	/* Read part identification number
+	Command Read part identification number
+	Input 	Command code: 54 (decimal)
+			Parameters:None
+	Return 	Code CMD_SUCCESS |
+	Result 	Result0:Part Identification Number.
+			Result1:Part Identification Number.
+	Description This command is used to read the part identification number. See Table 1082 
+	<09>LPC43xx part identification numbers<72>.
+	The command returns two words: word0 followed by word1. Word 0 corresponds 
+	to the part id and word1 indicates the flash configuration or contains 0x0 for 
+	flashless parts. 
+	Stack usage 8 B	*/
+
+	IAP_CMD_READ_SERIAL_NO = 58
+	/* Read device serial number
+	Input Command code: 58 (decimal)
+	Parameters: None
+	Return Code CMD_SUCCESS
+	Result	Result0:First 32-bit word of Device Identification Number (at the lowest address)
+			Result1:Second 32-bit word of Device Identification Number
+			Result2:Third 32-bit word of Device Identification Number
+			Result3:Fourth 32-bit word of Device Identification Number
+	Description This command is used to read the device identification number. The serial number 
+	may be used to uniquely identify a single unit among all LPC43xx devices.
+	Stack usage 8 B	*/
+} iap_cmd_code_t;
+
+/* ISP/IAP Return Code */
+typedef enum 
+{
+	CMD_SUCCESS					   = 0x00000000, /* CMD_SUCCESS Command is executed successfully. Sent by ISP handler only when command given by the host has been completely and successfully executed. */
+	INVALID_COMMAND				   = 0x00000001, /* Invalid command. */
+	SRC_ADDR_ERROR 				   = 0x00000002, /*  Source address is not on word boundary. */
+	DST_ADDR_ERROR				   = 0x00000003, /* Destination address not on word or 256 byte boundary. */
+	SRC_ADDR_NOT_MAPPED			   = 0x00000004, /* Source address is not mapped in the memory map. Count value is taken into consideration where applicable. */
+	DST_ADDR_NOT_MAPPED			   = 0x00000005, /* Destination address is not mapped in the memory map. Count value is taken into consideration where applicable.*/
+	COUNT_ERROR                    = 0x00000006, /* Byte count is not multiple of 4 or is not a permitted value. */
+	INVALID_SECTOR                 = 0x00000007, /* Sector number is invalid or end sector number is greater than start sector number. */
+	SECTOR_NOT_BLANK               = 0x00000008, /* Sector is not blank. */
+	SECTOR_NOT_PREP_WRITE_OP       = 0x00000009, /* Command to prepare sector for write operation was not executed. */
+	COMPARE_ERROR                  = 0x0000000A, /* Source and destination data not equal. */
+	BUSY                    	   = 0x0000000B, /* Flash programming hardware interface is busy. */
+	PARAM_ERROR                    = 0x0000000C, /* Insufficient number of parameters or invalid parameter. */
+	ADDR_ERROR                     = 0x0000000D, /* Address is not on word boundary. */
+	ADDR_NOT_MAPPED				   = 0x0000000E, /* Address is not mapped in the memory map. Count value is taken in to consideration where applicable. */
+	CMD_LOCKED                     = 0x0000000F, /* Command is locked. */
+	INVALID_CODE                   = 0x00000010, /* Unlock code is invalid. */
+	INVALID_BAUD_RATE			   = 0x00000011, /* Invalid baud rate setting. */
+	INVALID_STOP_BIT			   = 0x00000012, /* Invalid stop bit setting. */
+	CODE_READ_PROTECTION_ENABLED   = 0x00000013, /* Code read protection enabled. */
+	INVALID_FLASH_UNIT 			   = 0x00000014, /* Invalid flash unit. */
+	USER_CODE_CHECKSUM 			   = 0x00000015, 
+	ERROR_SETTING_ACTIVE_PARTITION = 0x00000016,
+	
+	/* Special Error */
+	ERROR_IAP_NOT_IMPLEMENTED      = 0x00000100 /* IAP is not implemented in this part */
+} isp_iap_ret_code_t;
+
+typedef struct
+{
+	/* Input Command/Param */
+	struct
+	{
+		iap_cmd_code_t command_code;
+		uint32_t iap_param[5];
+	} cmd_param;
+	
+	/* Output Status/Result */
+	struct
+	{
+		isp_iap_ret_code_t status_ret; 
+		uint32_t iap_result[4];
+	} status_res;
+} iap_cmd_res_t;
+
+/* Check if IAP is implemented */
+bool iap_is_implemented(void);
+
+isp_iap_ret_code_t iap_cmd_call(iap_cmd_res_t* iap_cmd_res);
+
+#endif//__ROM_IAP__