Tweaks for CarPi setup/install

CarPi/README.txt

@@ -0,0 +1,21 @@
+
+	Raspberry Pi 3 (RPi) Setup
+	==========================
+
+After writing the MicroSD card with the Raspbian image downloaded from the raspberrypi.org site,
+put it into the MicroSD card slot on the RPi and power it up.
+
+Open a console window, and run the following commands.
+
+sudo apt-get update
+sudo install git subversion
+mkdir NTCNA
+cd NTCNA
+svn co https://www.probestar.com/NTCNA/CVehicle (password is temppwd)
+cd NTCNA/CVehicle/trunk/platforms/bboneb
+./rpi-setup.sh
+
+Takes awhile till it is done.  There is a lot of software to install.
+Powercycle the BBB.
+
+Adjust start_v2v.sh link as needed, re-run to run the right apps.