Raspberry Pi 3 (RPi) Setup ========================== After writing the MicroSD card with the Raspbian image downloaded from the raspberrypi.org site, put it into the MicroSD card slot on the RPi and power it up. Open a console window, and run the following commands. sudo apt-get update sudo install git subversion mkdir NTCNA cd NTCNA svn co https://www.probestar.com/NTCNA/CVehicle (password is temppwd) cd NTCNA/CVehicle/trunk/platforms/bboneb ./rpi-setup.sh Takes awhile till it is done. There is a lot of software to install. Powercycle the BBB. Adjust start_v2v.sh link as needed, re-run to run the right apps.